Air Purification, Indoor Air Quality Enhancement Products
Morris Heat and Air designs and installs air purification systems to help neutralize air contaminants. Ultraviolet purifiers have been used in a wide range of sterilization applications for almost 100 years, including water treatment, food processing and disinfection of hospital equipment. Outdoors, the sun’s ultraviolet (UV) radiation destroys and deactivates airborne biological and chemical contaminants. Just like the sun’s rays, Morris Heat and Air’s Clean Comfort air purification systems’ UV light brings the same natural process into your home. The UVC range of ultraviolet light (with wavelengths of 100 to 280 nanometers) has germicidal activity that deactivates viruses, bacteria and mold by attacking their DNA preventing them from replicating and eventually destroying them. Clean Comfort brand air purifiers are our preferred air purification product that works to reduce the amount of airborne microbes in your home by helping to deactivate them with UVC light. Because UVC light has been used for decades to help deactivate microbes without emitting chemicals, it is considered a proven and reliable method for sterilizing indoor air. The UVC light of the UA Series Air Purifiers irradiates microbial contaminants as they pass through the sterilizing chamber. The “Turbulator” acts to slow down and spin the air entering the chamber to increase exposure time with the light from the specially-designed J-shaped UV lamp. The reflective inner surface of the sterilizing chamber further increases the effective intensity of the UV light, resulting in a substantially higher deactivation rate of the microbes passing through the Clean Comfort brand UA4000DV and UA2000DV Air Purifiers compared to UV purifiers without these features, such as single lamp coil purifiers. Our air purification system installation are not limited to just UVC Lights, but also evaporator coil UV lamps and independent multi-stage air purification systems for homes with ductless system installations. Morris Heat and Air offers the industry’s leading products by Clean Comfort for all of your Indoor Air Quality Essentials. For a complete list of our service area please click here!
Ductless Mini Split Heat Pump Installation
Our Ductless Mini Split Heat Pump Installations are professionally done to all Manufacturer’s specifications. Our featured products are Daikin, but we install internet order brands as well including and not limited to Pioneer, Daikin, Meteo, Frigidaire, Friedrich, Goodman, Carrier, Trane, Mitsubishi, Gree, Whirlpool, Samsung, LG, Blueridge, Klimaire, Toshiba, Fujitsu, Haier, Sanyo, Airease, Panasonic, Midea, and Hitachi. All of our Daikin Products are covered by a 12 year manufacturer’s warranty.
Aesthetically, Morris Heat and Air is the best in the HVAC business when it comes to making your ductless system installation look nice both inside and outside your home. We use the industry’s leading channeling system to cover all refrigerant piping and communication wiring. If it doesn’t look good Morris Heat and Air didn’t install it!
The proper tools are key to a long lasting ductless installation, regardless of the brand. We use the industry standard flare tools and torque wrenches to ensure a proper installation that will provide you with comfort all year. On top of the common tools, Morris Heat and Air also carries Core Drilling equipment for commercial and residential installations consisting of ICF or Insulated Concrete Forms. These installations can be tricky due to the ductless system modifications required for installation behind 14″ thick walls. Nobody does it like Morris Heat and Air when it comes to ductless system installations in and outside of the Tulsa and Okmulgee areas.
Morris Heat and Air installs and services all ductless mini split heat pump systems in the following areas: Henryetta, Okemah, Pharoah, Weleetka, Wetumka, Dustin, McAlester, Lake Eufala, Checotah, Okmulgee, Morris, Beggs, Hoffman, Dewar, Council Hill, Wainwright, Haskell, Bixby, Leonard, Stone Bluff, Winchester, Glenpool, Kiefer, Sapulpa, Slick, Jenks, Tulsa, Sand Springs, Broken Arrow, Catoosa, Coweta and all other areas in Northeast Oklahoma. Dont hesitate to cal us at anytime! We are available 24/7!
Air Conditioner Repair, Service, Sales and Installation
Morris Heat and Air services all makes and models of air conditioners. We have over a decade of experience in servicing residential and commercial air conditioners. Our company uses the latest technology to promptly and accurately diagnose all problems with air conditioners. Morris Heat and Air is not just focused on immediate problems with your air conditioner but is focused on all aspects of your air conditioning system including the refrigerant line sizing, duct sizing, duct leakage rate, home leakage rate, insulation levels of your home, and filter sizing. Our repair options come with, up to, a 5 year parts and labor warranty and are the highest quality repair options for your air conditioner. Our featured products are Goodman and Daikin because of their dependability, reliability, quiet operation and price. We offer a Lifetime Warranty for all of our Goodman Brand Air Conditioners which leaves you with peace of mind, knowing that after installation, if your equipment breaks down, Morris Heat and Air is here to fix it for free! Thats our Lifetime Guarantee. Our air conditioner repair options are not limited to just ducted air conditioning systems, but cover all forms of air conditioners such as ductless systems, mini splits, swamp coolers, window air conditioners, air cooled and water cooled chillers, dehumidifiers, and much more. We also service all brands of air conditioners including Goodman, Daikin, Gree, Lennox, Janitrol, Amana, Broan, Carrier, Bryant, Payne, GMC, Aire Flo, Concorde, Armstrong Air, Ruud, Rheem, Trane, American Standard, York, Ingersol Rand, Climate Masters, Kenmore, ICP, Heil, Haier, Mitsubishi, LG, Copeland, Fujitsu, and many more. If you need air conditioner repair in Henryetta, Okemah, Pharoah, Weleetka, Wetumka, Dustin, McAlester, Lake Eufala, Checotah, Okmulgee, Morris, Beggs, Hoffman, Dewar, Council Hill, Wainwright, Haskell, Bixby, Leonard, Stone Bluff, Winchester, Glenpool, Kiefer, Sapulpa, Slick, Jenks, Tulsa, Sand Springs, Broken Arrow, Catoosa, or any other area in Northeast Oklahoma, please call us today! (918) 734-0040. To stay up to date with what Morris Heat and Air is doing on a day to day basis, please consider liking us on Facebook at https://www.facebook.com/MorrisHeatAir or following us on Twitter at https://twitter.com/morrisheatair. These pages display a large amount of our previous work and so does our image gallery located at https://www.morrisheatandair.net/image-gallery/
Attic Insulation Installation and Removal
Morris Heat and Air offers attic insulation for residential homes. The Department of Energy estimates that upgrading the attic’s insulation level is the most cost effective energy efficiency upgrade money can buy. Our company not only blows insulation, but we also offer removal of insulation for various reasons. There are many reasons attic insulation removal may be necessary. For starters, animals may have built nests or began living within your pre-existing insulation. When animals begin nesting within your attic’s insulation, they secrete urine, feces, and musk within the insulation and can also die inside the attic. This can make the air within your home very dangerous and can cause a number of health problems that are a direct result of rodent urinary protein. Our commercial grade fiberglass insulation removal machine will ensure a fast and safe removal that results in a much cleaner environment within your home. When removal of fiberglass insulation is necessary, it is blown into 750 cubic foot bags that are safely hauled off to the local dump. The removal of your attic’s insulation is also necessary to uncover the ceiling of your home so that your home may be sealed. Building Performance Institute estimates that up to 85% of a home’s leakage is in the ceiling. By removing your attic’s insulation, we are able to fully access all aspects of your ceiling which enables us to seal it properly. Attic Insulation Removal may also be necessary when updating the electrical, mechanical, lighing, or plumbing systems within your home. By removing the attic insulation within your attic, contractors will have full access to make the necessary repairs to your home. Attic Insulation that is removed from your home can also be blown back in. Our Attic insulation blower is very high capacity and cuts the installation time in half when compared to other methods of installation. Morris Heat and Air offers attic insulation in the following cities: Tulsa, Glenpool, Bixby, Okmulgee, Owasso, Eufala, Checotah, Henryetta, Morris, Okemah, Haskell, Taft, Mounds, Skiatook, Sapulpa, Boynton, Preston, Beggs, Jenks, Coweta, Pharoah, Wainwright, Leonard, Stone Bluff, and Broken Arrow. Call us today for a free estimate to remove the attic insulation within your attic and to insulate your home.
Floor Furnace Repair, Sales, Service and Installation
Morris Heat and Air offers repair and replacement (if available) for nostalgic forms of heating. We service the following nostalgic forms of heating: Floor Furnaces, Wall Furnaces, Ventless Ceramic Heaters, Pellet Heaters, Gas Logs, Gravity Furnaces and many more. Floor furnaces are still manufactured today by several companies and are still an available option to homeowners who currently use them as a primary source of heat. Due to the high level of floor furnace installations in Tulsa, Muskogee, Okmulgee and other major cities in Northeast Oklahoma, Morris Heat and Air continues to utilize their overall experience of Floor Furnace Repair to better assist homeowners in need of repair, service or installation of floor furnace. We currently sell Cozy Brand Floor Furnaces as our recommended product, but also sell Williams Brand as well as Empire. Morris Heat and Air still offers Tulsa floor furnace installation as well as Muskogee floor furnace installation and Okmulgee floor furnace installation. On top of floor furnace repair, Morris Heat and Air also offers repair and replacement options for other forms of heating such as wall furnaces and ventless ceramic heaters. Though manufacturers like John Zinc and Southwestern no longer exist, Morris Heat and Air continues to find alternative solutions to repair and retrofit their products. Our repair options for Cozy products continue to offer OEM Replacement parts, but for brands like John Zinc and Southwestern there are no longer OEM parts available. We continue to offer repair on these obsolete models that offer years of safe, dependable and reliable heating for you and your family. Safety is our primary goal due to the dangerous nature of floor furnaces and wall furnaces. When we come into your home and repair your nostalgic form of heat, you can rest assured that you and your family are safe. Our primary focus is to ensure that the integrity of your appliance’s heat exchanger is not compromised and that all components are safely and securely attached to the appliance so that your appliance will not allow flames to roll out. To set up service for your nostalgic form of heat, please call us at (918) 734-0040
Duct System Sales, Design, Sealing and Installation
Morris Heat and Air offers duct system sales, design, sealing and installation. Our duct systems are designed and installed to ACCA and BPI Standards. We install duct systems to last and our newly installed duct systems come with a 10 year sealing warranty. We install Rigid Hard Pipe, Spiral Exposed Duct, Vinyl Flexible Duct, S and Drive, TDC and Duct Mate Frame Duct Systems. Call us today to learn more. And Remember, it all begins with a proper design. (918) 734-0040
Home Performance Analysis, Design, and Implementation
Morris Heat and Air offers BPI Certified Home Energy Analysis. BPI Certified Home Energy Analysis addresses comfort level issues that effect the way our heating and cooling equipment operate. We offer blower door testing, duct system testing, and pressurization testing using Aeroseal technology. We also offer combustion safety testing, fan flow testing, and gas pipe leakage testing using flammable gas leak detection and air pressurization testing. Your home’s performance is the key to lower utility cost, home comfort, and the longevity of your HVAC Equipment’s installation. Call us today to learn more! (918) 734-0040
Heater and Furnace Sales, Service, and Installation
Goodman Furnaces installed by Morris Heat and Air are backed by a Lifetime Warranty. We offer free estimates for New Furnace installations in Tulsa and Okmulgee area. Before you make a decision to purchase a new furnace make sure to consider Morris Heat and Air and our Goodman Brand products. There are several reasons to choose Goodman Brand heating equipment and we are sure you will agree. With our Lifetime Warranty, what do you have to lose? Morris Heat and Air services all makes and models of heaters, heat pumps, gas furnaces, electric air handlers, pancake units, and boilers. Our featured products are Goodman and Daikin because of their dependability, reliability, quiet operation and price. We offer a Lifetime Warranty for all of our Goodman Brand Furnaces and Heaters which leaves you with peace of mind, knowing that after installation, if your equipment breaks down, Morris Heat and Air is here to fix it for free! Thats our Lifetime Guarantee. We also service all other brands of furnaces and heaters including Lennox, Janitrol, Amana, Broan, Carrier, Bryant, Payne, GMC, Aire Flo, Concorde, Armstrong Air, Ruud, Rheem, Trane, American Standard, York, Ingersol Rand, Kenmore, ICP, Heil, Haier, Mitsubishi, LG, Copeland, Fujitsu, and many more. Dont be afraid to call us today to learn more about our Goodman Brand heating systems. We offer free estimates on system replacement and are available 24 hours a day and 365 days a year. If you want the job done right, we are your go-to source for all your heating needs.
When installing any mechanical equipment on your home, our primary concern is the safety of you, your family and our employees. Our employees are OSHA certified and trained to be safe when working at your home. It is our primary goal to ensure that all combustion appliances are installed correctly so that you and your family are safe and secure in your own home. Call us today to learn more (918) 734-0040
Morris Heat and Air’s mission statement is to reduce your energy usage on your home to nothing. The way we are able to do this is to reduce your energy usage by implementing home improvement upgrades like sealing your home, sealing your duct system and insulating your home correctly. Once we have your home working correctly and using as little power as possible, we are able to offset the rest of your usage with a small solar system or wind turbine. Solar systems and wind turbines installed by Morris Heat and Air will produce power for you and your family and give you years of reliable power production. By utilizing your utility company net metering program and agreeing to interconnect to your local utility provider’s grid, Morris Heat and Air can fully offset your energy usage with production from a renewable energy resource. On top of power production, Morris Heat and Air also offers the installation of Electric Vehicle Charging Stations to power your EV (Electric Vehicle). When you produce power at your home or business, Morris Heat and Air can help you find innovative ways to use excess power production to your favor. Electric Vehicles are a great way to utilize excessive power production. They can be charged while parked and give you the ability to operate a vehicle using free fuel from your solar system or wind turbine. Don’t wait another minute! With Federal and State Tax Credits and Grants available, installing a source of power production for your home or business is a no brainer. Morris Heat and Air offers Design, Sales and Installation of Solar Systems and Wind Turbines. Morris Heat and Air offers the following renewable energy services: Solar Systems, Wind Turbines, Grid Tied, Interconnect Agreements, Utility Interactive, Solar Thermal, Battery Systems, and EV Charging Stations. We follow all NEC and NABCEP Standards and practices when installing your renewable energy resource. If you are interested in producing power, please call us today for a free quote at (918) 734-0040.
Aeroseal “Duct Sealing From The Inside”
Morris Heat and Air offers Aeroseal Duct Sealing technology to seal duct systems in Northeast Oklahoma. Duct Systems are very important. A well designed duct system that is sized correctly and sealed correctly is a welcomed asset to a home, whereas, a poorly designed duct system that is sized incorrectly and not sealed can be burdensome on both our pocket books and our health. Sealing duct systems used to be a huge hassle because of the time required to seal and all the messy pastes and tape that was required to do it. The oil coating on elbows and fittings made tape incapable of sticking to the metal and fiber paste used for duct sealing prolongs the duct system installation process by up to 3 days to give the paste adequate time to dry before insulating. With Aeroseal, you can enjoy the benefits of duct sealing without the time required by other methods of duct sealing. Its fast and easy and usually takes less than 6 hours. There are four primary benefits to utilizing the Aeroseal process for duct sealing. With Aeroseal you will receive the added benefits of:
-Lower Energy Consumption
-Improved Air Quality
-A 10 Year Warranty on the seal from Aeroseal!
We were live on Twitter Aerosealing a duct system! Click here to see us in action!
Sealing your duct work is the best home improvement you can make from an energy standpoint. Especially when the duct system is located in the attic and under the crawl space of a home. Aeroseal can reduce duct leakage by up to 90%, reduce your energy use by up to 30% and has also been shown to dramatically improve comfort and homeowner satisfaction with their heating and cooling systems. The truth is that a leaky duct system loses both conditioned air to the outdoors and draws in unconditioned and unfiltered air from the outdoors as well. This puts added stress on your central heating and cooling system. The bad thing about duct leakage adding undue stress to your central heat and air system is that your heat and air system runs more often which costs more money in energy, requires more maintenance, and diminishes the life of your HVAC equipment. On top of all this, with a leaky duct system, you never truly condition the air within your home. Click to view a Home Efficiency Opportunity Chart published by The New York Times:
The New York Times estimates that the most cost effective energy efficiency upgrade to your home is to ensure that your duct system is sealed properly. What many people do not understand is that the duct system is directly related to the home’s leakage rate as well. The New York Times also estimates sealing your home is one of the top 6 energy efficiency upgrades in terms of what you spend and what you actually get out of it in energy savings. Many people miss out on the opportunity to seal their home by having attic insulation blown into their attic. The truth is that up to 85% of a home’s leakage is located in the ceiling of the home and the duct system. By blowing attic insulation into your home prior to sealing the duct system and the home, you make the home sealing process more expensive. From a professional standpoint, I place the most important energy efficiency upgrades in the following order: Duct Sealing, HVAC Equipment Upgrade, Home Sealing, Attic Insulation. When done in this order, you save thousands of dollars in labor. We see people all the time that have invested in attic insulation prior to calling us out to their home. A lot of times, attic insulation doesn’s solve their problem. Most of the time, duct leakage and home leakage is the primary cause of their discomfort. In order for us to effectively seal their home, we must first vacuum out all of the attic insulation and then seal their home. Fortunately, we have the ability to vacuum out the attic insulation and blow it back into the attic when we finish sealing the duct system and home.
People are beginning to realize the importance of their home’s air quality. As more and more homes are being inspected by more and more inspectors, the issue of indoor air quality is becoming more and more of an issue. I continually get requests to install air filtration systems and UV Lights to improve the air quality of homes. The truth is that HEPA Filters and UV Lights are incapable of conditioning the air within your home until the duct system and home is sealed tight. One of the great things about Aeroseal is that it seals your duct system from the inside so that conditioned air does not escape to the outside and unconditioned air, from outside, doesn’t get drawn in through leaky ducts. Only when the duct system and home are sealed will HEPA Filters and UV Lights effectively condition the air within the home. Your ducts shouldn’t cost you money, but they can and do! About 47% of the average home’s utility bill is spent on heating and air conditioning. On average, 30 cents of every $1.00 spent on heating and cooling a home disappears through leaky ducts. Duct leaks can be difficult and costly to find with duct work hidden between the walls, floors, and ceilings of any residential home or commercial building. The older, traditional use of mastic or taping of leaks is less effective than Aeroseal, but also can be very labor-intensive and expensive and can only be applied to ducts with physical access. Our Aeroseal duct sealing system is the answer to this problem. Aeroseal is not only the answer to this problem, but it also does a better job of sealing the ducts and is backed by a 10 year warranty from Aeroseal!
My name is John Morris with Morris Heat and Air and I invite you to learn more about what our Aeroseal duct sealing system can do for you. I hope you will consider choosing Morris Heat and Air for your home energy efficiency upgrade. We participate in all of the local utility rebate programs and extend utility company rebates to our customers. On top of all of this, Morris Heat and Air is the first Heat and Air company in the state of Oklahoma to own the Aeroseal Duct Sealing Machine. Though most municipalities have not adopted the IECC (International Energy Conservation Code), Morris Heat and Air has been continually striving to implement it in all aspects of business practice. That is why the average Morris Heat and Air customer pays less for their month to month energy bill than consumers that choose other service providers. Call us today to learn more about what Aeroseal can do for you and your family. (918) 734-0040
My name is John Morris the owner of Morris Heat and Air. We are located in Okmulgee Oklahoma and serve […]
My name is John Morris with Morris Heat and Air in Okmulgee Oklahoma. As of 2017, we are Okmulgee‘s only […]
Morris Heat and Air displayed superior service to Thumbtack customers during the 2015 Season. Morris Heat and Air maintained a […]